× For posting reviews of equipment you have actually used. Please try and substantiate any claims with measured results.

Audiopipe AP3000.1

9 years 1 month ago #1 by AbsoluteBeauty
Not really a big name brand or huge on quality but not a bad amp, will do around 2800WRMS clamped with a 1.5ohm load on a 12V system. The output power is pretty dirty, but you can get them new for around $400 online.

People may not get the correct ohm load to use its power, its only 2ohm stable. It is a two channel amp pretty much, with two AP15001 boards strapped together inside one huge case.

Rated 1500rms x 2 @ 1 ohm
3000rms x1 @ 2 ohms.

So if you can get close to a 2 ohm reactive impediance you will get the most out of it. But its NOT stable at 1 ohm when its running in mono mode and will protect on 1ohm.
9 years 1 month ago - 9 years 1 month ago #2 by slim2fattycake
Did you probe the amp when you did the power test to see if the signal was actually dirty or just going by what everyone says?
Time to create page: 1.078 seconds