AE101 hatch

6 years 1 month ago #1 by steveo
hi well the car is currently decently loud however im looking at

(single 18)

tho im now wanting to go for lows.
the gear in the build( currently own) are as follows :
- 2x RE MT 18's d1dvc, quad spider, dual tinsels
- 1x Vibe Reaper
- 3x sets RE SR components (2x installed in front door)
- 2x RE XTX 800.4
- 1x Pioneer AVH-X555BT
- 1x Lanzar optix3b
- 1x Optima D34 ( Starter batt)
- 2x Vision batts (998CCa/120AH)
- 1x Ultimate Batt (546CCa/105Ah)
- 1x odyssey 2150 (1150cca/100ah) , 1500 amps high current
- 2x sets of Tool Maker dual inputs for the monoblock

there is approx 3 bulk packs of dynamat/carbuilders, Mdf in the roof and spray foam already

Currently in a coffin box however im wanting a full wall and all i can say is um.... Help!! gots no idea where to even begin with a wall design.
the car itself is being engineerd as a 2 seater.

This message has an attachment image.
Please log in or register to see it.

6 years 1 month ago #2 by Tezzating
There's a few instructional guides to get you started..

First a tips list for ideas to try with your new wall:

Secondly, 1/4 wave theory which will help you design a wall that works:

Finally, here's some advice on bracing the wall:

A well built wall will be extremely heavy.. expect it to ruin your fuel economy and handling, not to mention performance :P you'll get used to 3rd gear up hills I assure you

The lazy mans signature (TM)
Its Baby
6 years 1 month ago #3 by Tezzating
Oh and here's an old build log I did years ago, lots of pictures to get you started.. its a good starting point, but I should have used 2x 1" MDF and made it bigger!

The lazy mans signature (TM)
Its Baby
6 years 1 month ago #4 by Andy
There's all the info you need Roachy! :P
Time to create page: 2.177 seconds