Whether you are a car enthusiast, a DIY home mechanic or a professional, you need a good set of tools. There is nothing worse than getting partway through a job and realizing that you don’t have the right tools on hand to finish the job.
That’s why we’ve put together this list of essential tools that every mechanic should own.
1. Wrench Set
- Stamped hashmark pattern on wrench handle provides added grip points.
- Longer panel design gives more torque during use.
Without doubt, one of the most useful tools in every mechanics’ toolkit is a quality wrench set.
Almost every mechanical job you do will require at least one or two wrenches, and as such, you should purchase the best quality set you can afford.
Wrenches come in both metric and standard (Imperial) sizes, and you should buy both; however, if you have to choose, buy a metric set first. We recommend that you buy a set that ranges from 6mm to 24mm in size.
2. Ratchet and Socket Sets
Ratchets and sockets are another of the essential items that you’ll need for your mechanic’s tool kit.
Ratchets come in three different sizes: ¼” (small), ⅜” (medium) and ½” (large), and you will need all three. It is possible to buy ratchet and socket kits that will come with all three ratchet sizes and all of the basic socket sizes that you’ll need.
You should buy sockets that range in size from 6mm to 32mm in size.
- Included: 1x Scissor Jack, One (1) tire lug wrench, two (2) extension segments,...
- This premium, heavy duty 4-piece steel tire wrench set includes 1 lug wrench, 2...
Not a tool that you will require for every job, it is none-the-less an essential item that every mechanic should own. Whenever you need to gain access to the underside of a car, you’ll appreciate a good hydraulic jack.
You should note, though, that jacks are lifting tools only. They are not designed to secure a car in a raised position, and for that, you’ll also need a set a jack stands.
4. Jack Stands
- Pair of 2-ton jack stands with 4,000-pound capacity total (when used together)
- Self-locking ratchet means no locking key is necessary; meets ASME PASE-2014...
Once you’ve lifted your car with a hydraulic jack you’ll need some jack stands to keep it secured in place. These stands are an important tool for your safety, and as such, not something to skimp on. Every mechanic needs at least one pair of jack stands, and you should ensure they are rated to hold at least 2-3 tons.
5. Screwdrivers with Hex Bolsters
A good set of screwdrivers is another must for any mechanic. They are a basic hand tool that you will use over and over and like your wrench set you should buy the best quality screwdriver set that you can afford.
While not essential, we strongly recommend that the screwdrivers you buy have hex bolsters. These are a heavy-duty type of screwdriver that will allow you to slide a wrench over the shaft and use it to provide more torque on tough hard to move screws.
6. Torque Wrench
- Includes storage case and product manual with torque conversion chart
- Wrench emits a click that can be heard and felt when the preset value is reached
A torque wrench looks very similar to a standard wrench but, unlike standard wrenches, a torque wrench allows you to tighten bolts to an exact specification. Something particularly useful when installing sparkplugs or working on a car’s engine or transmission.
7. Hex Wrench / Allen Key Set
- Precisely sized, chamfered, straight ends offer a snug fit and insert smoothly...
- Black oxide finish protects against corrosion without added plating that could...
You will have no shortage of jobs that require the use of a hex wrench as car manufacturers Allen head bolts to secure all sorts of vehicle components.
These simple wrenches are designed to fit into the tightest of spaces and are a necessity in any toolkit.
8. Flex-Head Ratchet
- 84 tooth gear offers a 4.3° swing arc for easy access
- Teardrop shaped head and flush-mounted on/off switch allow even more access in...
A good flex-head ratchet allows you to squeeze your ratchet head into almost any space, and then pivot the handle for maximum leverage. It is a great tool for removing sparkplugs and hard to reach fasteners, they may also save from having to unnecessarily disassemble other parts just to gain access to one or two tricky bolts.
9. Oil Filter Wrench
An oil filter wrench allows you to remove spin-on style oil filters easily. These filters are smooth cylindrical canisters and can be very slippery when covered in oil, so you will need a tool that can slip over the canister and hold it fast while it’s removed.
10. Oil Dripping Pan
- PROFESSIONAL GRADE: Our oil drip pan is durable enough to withstand regular use,...
- EASY-TO-GRIP EDGES: Our oil drip pan is specifically designed to contain fluids...
Changing the oil of a car is one of the most basic maintenance jobs that you can do, but unless you want oil all over the floor of your workshop, you need a good oil pan.
An oil dripping pan is a simple but essential tool, and as they’re quite cheap, we recommend that you get a couple of them, each with a capacity of at least 10 liters.
11. Cable Ties / Zip Ties
Cable ties are a simple and useful addition to any mechanics toolbox. They come in various sizes and colors, and you should purchase a range of them as they are a great way to fasten parts and cables and to mark components for later identification.
12. Battery Carrier
- Carrier works on nearly all batteries, from motorcycles to boats
- Saw-tooth jaw tips provide no-slip battery gripping power
A battery carrier is a simple tool that does what its name suggests.
Old car batteries can be quite heavy, and they always end up being wedged in tight, making them difficult to remove. With a battery carrier, you can safely and easily lift a battery straight out of the tightest sport, carry it away.
13. Flexible Funnel
A flexible funnel is another simple and inexpensive tool that will prevent you from spilling fluids all over your workshop. With a long hose that the bottom of the funnel that can bend and flex, you can be sure that oil and other fluids will only flow to exactly where they need to go and nowhere else.
14. Screw Pitch Gauge
- Quickly and accurately determine the screws size
- Recommends the drill bit or tap size needed for the screw
It is essential that whenever you replace a lost or damaged bolt, the replacement has the correct thread pitch. Unfortunately, this isn’t something that is easy to do by sight. That’s where a screw pitch gauge comes in handy as it allows you to check that you’re not about to insert a bolt that has an incorrect thread.
15. Finger Ratchet
- Gimbal Design Allows Ratchet to Pivot in Two Directions for Easier Access
- 72-Tooth Ratcheting Mechanism for 5 Degree Swing Arc
A finger ratchet is a handy little tool that allows you to reach in under dashboards, as well as into other tight-fitting places, to undo hex-head bolts that you would never be able to reach with a larger tool. With a finger ratchet, if you can get your hand to the bolt, you can undo it as the fine-tooth ratchet mechanism allows you to rotate your hand backwards without screwing the bolt back in.
16. Sparkplug Pliers
- Two pulling positions help make removing spark plug wires a safe and easy job
- Specially shaped, cushioned jaws grip the boot straight on or from the side
If you’ve ever grabbed a sparkplug cable boot with a pair of standard pliers, you’ll know how easy it is to tear the boot or damage the clip inside. And that’s where sparkplug pliers come in. With specially designed and padded jaws, they allow you to get a firm grip on a sparkplug boot without tearing away the boot or damaging the clip.
You probably won’t use your sparkplug pliers every day, but the time and effort they will save in replacing sparkplug wiring make them an invaluable piece of your toolkit.
Every mechanic needs a good flashlight and you should have at least one in you kit. Engines and other the mechanical workings of cars are often dark and hard to see into without a small flashlight. We recommend a flashlight that is small enough to fit in your hand, and that gives out a bright white light.
18. Utility Knife
A utility knife is something that will get a considerable use in your workshop. They’re useful for a wide range of tasks, from opening boxes to cutting away tape and plastic fastenings and even cutting hoses.
Most mechanical jobs will require the use of pliers, and for this reason, they are another essential tool for you workshop.
Pliers come in a variety of sizes and types, and at the very least you will need a pair of regular pliers, wire cutting pliers and needle-nose pliers. You may also want to consider buying a pair of pliers with an adjustable sized jaw.
20. Vice Grip
- Curved jaw with hardened teeth are designed to grip a variety of shapes from any...
- Classic trigger release provides maximum locking force
Vice grips are pliers that allow you to lock the jaws of the pliers into position. These are particularly useful when working on jobs that require you to keep a solid grip on something, as the jaws can be secured in place and significantly more force applied than would be possible with a pair of regular pliers. You also don’t need to worry about apply to much force on the component you are holding as you can set this before the jaws are locked.
Every mechanic needs a solid hammer in their toolkit. When you’re working on cars, things get stuck with grease, dirt and rust and sometimes the best solution to the problem is a good whack with a hammer.
There are a variety of different types of hammers available, and we recommend a ball-peen hammer with a solid handle, although you may also want to get yourself a club hammer.
22. Pry Bar
- Versatile, all-purpose contoured bar with broad flat end and high-leverage...
- Thin, sharpened chisel tips slide easily into the tightest cracks and crevices
Pry bars are simple but handy tools that are great for getting the extra leverage you need to remove everything from wheel caps, drive shafts, brake drums, ball joints, and control arms.
You are likely to need two pry bars, one small and one large, and we recommend that you buy the best quality you can afford. These bars are often placed under a lot of pressure and a cheap bar is much more likely to bend or snap.
23. Door Trim Removal Tool
- Heavy duty chrome plated shaft
- Large easy grip handle
If you need to do any work that involves removing trims or upholstery, a door trim removal tool is essential. They are great for removing plastic clips and interior paneling, and will ensure you can remove trims and panels without breaking them.
A multimeter is an essential tool for diagnosing electrical problems, and allows you to measure voltage, resistance and amperage. They are extremely useful and will get a lot of use out of your multimeter.
25. Air Compressor
If you are planning on doing heavy-duty mechanical jobs regularly, you will need a good air compressor. All professional mechanics use air-powered tools and having the ability to do so will save you time on almost every job you do.
An air compressor should be considered an investment and is something you only need to purchase once. We recommend that you buy the best compressor you can afford as you’re going to have it for a long time.
26. Tire Inflator with Gauge
- New dual AAA battery powered design. 4X the battery life and simplified battery...
- New 21” Stainless braided hose for increased durability
A tire inflator with gauge is the most basic air tool that you can get and probably the first air-tool that you buy once you have a compressor. Owning one makes checking tire pressures a breeze, and will ensure you always have you tires inflated to the correct pressure.
27. Impact Wrench
- Compact design and lightweight at only 7.2pounds
- Heavy Duty 1/2" Anvil with detent pin
As far as air-tools go, the one that you will use the most is an impact wrench. Almost every job in a mechanical workshop involves removing and later replacing nuts and bolts. Tasks such as removing wheel nuts can be back-breaking when done manually, but when you have an impact wrench, you’ll get them done in seconds.
You will find an impact wrench to be of great assistance when you’re working any job involving a car’s suspension, engine or steering.
28. Impact Sockets
- High-torque, 6-point socket design grips the flat sides of fasteners, not just...
- Extra-deep broach accommodates longer fasteners
Regular sockets are not designed for use with an impact wrench, and as such, you will need to have a set of impact sockets.
While you can buy impact sockets of all sizes, we recommend that you get a set that ranges in size from 10mm to 32mm.
29. Work Light
Your pocket-sized flashlight is great, but if you are going to be spending any amount of time working on cars, you will also need a good work light. We recommend you look for a rechargeable LED light bar that is easy to affix or hang under the hood of a car. This type of light is also suitable to be used under a vehicle.
30. Jumper Cables
Jumper cables are an essential item for every mechanic. A simple tool that most people are familiar with, they can be of great assistance if you have a vehicle with a flat battery that needs to be moved or brought into your workshop.
Featured Image Credit: Mechanic tools by radekkulupa, Pixabay
- 1. Wrench Set
- 2. Ratchet and Socket Sets
- 3. Jack
- 4. Jack Stands
- 5. Screwdrivers with Hex Bolsters
- 6. Torque Wrench
- 7. Hex Wrench / Allen Key Set
- 8. Flex-Head Ratchet
- 9. Oil Filter Wrench
- 10. Oil Dripping Pan
- 11. Cable Ties / Zip Ties
- 12. Battery Carrier
- 13. Flexible Funnel
- 14. Screw Pitch Gauge
- 15. Finger Ratchet
- 16. Sparkplug Pliers
- 17. Flashlight
- 18. Utility Knife
- 19. Pliers
- 20. Vice Grip
- 21. Hammer
- 22. Pry Bar
- 23. Door Trim Removal Tool
- 24. Multimeter
- 25. Air Compressor
- 26. Tire Inflator with Gauge
- 27. Impact Wrench
- 28. Impact Sockets
- 29. Work Light
- 30. Jumper Cables